Sharp MX-2614N User Manual

Page 628

Advertising
background image

6-12

DOCUMENT FILING

Contents

4

Select copy settings and then press the [COLOUR START] key or the [BLACK &
WHITE START] key.

• Copying begins and the scanned document image is saved to the hard drive.

The selected copy settings are also saved.

• To prevent accidental saving of the document, the message "The scanned data is stored in the quick file folder." appears

for 6 seconds (default setting) after the [START] key is pressed.
The message display time can be changed using "Message Time Setting" in the system settings (administrator).

• If you inserted the original pages in the document feeder tray, all pages are scanned.
• If you placed the original on the document glass, scan each page one page at a time.

When scanning of one page finishes, replace it with the next page and press the same [START] key that you pressed
initially.
Repeat until all pages have been scanned and then press the [Read-End] key.

To cancel scanning...
Press the [STOP] key (

).

When a file is stored using Quick File, the following user name and file name are automatically assigned to the file.

User Name: User Unknown
File Name: Mode_Day-Month-Year_Hour-Minute-Second

(Example: Copy_04042013_112030)

Stored to:

Quick File Folder

When user authentication is used, the user name that was used for login is automatically selected.
Only the file name and location of a file stored in the Quick File Folder can be changed.

To cancel Quick File...
Touch the [Quick File] key in the screen of step 2 so that it is no longer highlighted.

System Settings (Administrator): Delete All Quick Files
With the exception of protected files, all files in the quick file folder can be deleted at once.
Settings can be configured to delete all files by key operation and to have all files automatically deleted when the power is
turned on.

Advertising
This manual is related to the following products: