Contents placing a thick book – Sharp MX-2614N User Manual

Page 82

Advertising
background image

1-41

BEFORE USING THE MACHINE

Contents

Placing a thick book

When scanning a thick book or other thick original, follow the steps below to press the book down.

(1) Push up the far side of the automatic

document feeder.

The hinges supporting the automatic document feeder
will release and the rear side of the automatic document
feeder will rise.

(2) Slowly close the automatic document

feeder.

3

Close the automatic document feeder.

After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.

(2)

(1)

Caution

Close the automatic document feeder slowly. Abruptly closing the automatic document feeder may damage it.

Take care that your fingers are not pinched when closing the automatic document feeder.

The automatic document feeder cannot be closed correctly in this state. To return the automatic document feeder to its
normal state, open it completely and then close it.

Advertising
This manual is related to the following products: