Sharp MX-2614N - Manual (Page 773)

7-105
SYSTEM SETTINGS
Contents
Address Control
Address Book
This section explains items specifically used for fax in "Address Control". For items that are also used for other
functions, see "
Address Control " (page 7-16).
When the [Address Book] key is touched, the following screen appears.
• [Add New] key
Use this to add a new address.
• List display
This displays a list of the currently stored addresses.
An address can be selected to open an edit/delete
screen for the address.
Storing addresses
Touch the [Add New] key in the above screen to open a registration screen. Up to 1000 addresses can be stored.
For information on the settings, see "
Settings " (page 7-106).
Editing and deleting addresses
An address can be selected from the list in the above screen to open an edit/delete screen for the address.
For information on the settings, see "
Settings " (page 7-106).
Delete an address with the [Delete] key.
Address Book Back
Index Switch
Sort Address
Sorting Order
ABC
Search Number
All Add New
AAA AAA
CCC CCC
EEE EEE
GGG GGG
III III
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
Freq. ABCD EFGH IJKL MNOP QRSTU VWXYZ etc.
1
2
When " Disable Registering Destination from Operation Panel " (page 7-82) is enabled in the system settings (administrator)
for a function, addresses cannot be stored for that function.
• If you cannot edit or delete a one-touch individual or group key...
Individual keys and group keys cannot be edited or deleted in the following situations:
- The key is used in a reserved transmission or a transmission in progress.
- The key is included in a group key.
- The key is included in a program.
- The key is specified as an end receiving machine in an F-code relay broadcast transmission.
- When " Disable Registering Destination from Operation Panel " (page 7-82) is enabled.
If the key is used in a reserved transmission or a transmission that is in progress, cancel the transmission or wait until it is
completed and then edit or delete the key.
If the key is included in a group, first delete the key from the group and then edit or delete the key.
If the key is specified as a forwarding destination, cancel the forwarding destination setting and then edit or delete the key.
If "Disable Registering Destination from Operation Panel" has been enabled, clear this function and then edit or delete the
key.