Hale Q Series Muscle - Manual (Page 14)

 Safety Precautions
14 MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
IMPORTANT!
IMPORTANT - PRACTICES WHICH COULD RESULT IN DAMAGE TO THE APPARATUS
OR OTHER PROPERTY.
1.2 GUIDELINES
IMPORTANT!
THE PROCEDURES IN THIS MANUAL ARE GENERAL OPERATING PROCEDURES.
THEY DO NOT REPLACE THE PROCEDURES, POLICIES, OR GUIDELINES ESTAB-
LISHED BY THE AUTHORITY HAVING JURISDICTION, NOR DO THEY REPLACE THE
RECOMMENDATIONS AND PROCEDURES PROVIDED IN THE APPARATUS MANUFAC-
TURER'S MANUAL.
REFER TO THE PROCEDURES PROVIDED BY THE AUTHORITY HAVING JURISDICTION
ON SETTING WHEEL CHOCKS (TO PREVENT ANY MOVEMENT OF THE APPARATUS),
AS WELL AS LAYOUT AND CONNECTION OF HOSES, VALVES AND DRAIN COCKS.
ALL FASTENERS ON THE HALE PUMP AND GEARBOX ASSEMBLY ARE SELECTED
FOR THEIR APPLICATION. HALE PRODUCTS DOES NOT RECOMMEND REPLACING
FASTENERS WITH ANYTHING OTHER THAN HALE PART NUMBERS PROVIDED.
REPLACING WITH A WEAKER ALTERNATIVE POSES A SERIOUS SAFETY RISK.
ALL FASTENERS MUST BE INSTALLED WITH A LOCKING ANAEROBIC ADHESIVE/
SEALANT, SUCH AS LOCTITE
® #242 OR EQUIVALENT.
 Use care when removing the pump assembly from its packaging to prevent per-
sonal injury and/or damage to the system.
 Use all mounting bolt holes provided on the gearbox and/or the pump to support
the assembly. See the pump assembly plate drawing, located at the back of this
manual, for additional installation information.
 Installation should be performed by a trained and qualified installer, such as your
authorized Hale representative. Be sure the installer has sufficient knowledge,
experience and the proper tools before attempting any installation.