Hale Q Series Muscle - Manual (Page 35)

35 MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
Introduction 
Figure 2-13: Pump/Engine Rotation
HALE Power Takeoff (PTO) Driven Midship Pumps
Midship pumps feature a 1480 input flange for connection to a PTO driveline.
2.7 SERIAL NUMBER IDENTIFICATION
The midship pump assembly serial number is stamped in three locations on the
assembly, dependent on system model. The serial number nameplate is always
located on the gearbox, either on the very bottom of the housing or on one of the
sides near the bottom. (See Figure 2-14: “Typical Midship Pump Serial Number Loca-
tion” on page 36.)