Hale Q Series Muscle - Manual (Page 17)

17 MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
Safety Precautions 
information.
 DO NOT leave the cab, after selecting the PUMP mode, until all the GREEN pump
indicators in the cab and panel are ON. Also see Section 4 “Basic Operation” on
page 53 for additional information.
 DO NOT attempt emergency manual shift procedures while the engine is running.
Also see Section 4 “Basic Operation” on page 53 for additional information.
 Never attempt to shift the pump (PUMP-to-ROAD, vise versa) while the apparatus
transmission is in gear. Always shift the transmission to NEUTRAL (N) and verify
the speedometer is at ZERO (0) before shifting the pump. Also see Section 4
“Basic Operation” on page 53 for additional information.
 DO NOT reduce the pressure on the INTAKE gauge below zero (0). Serious dam-
age to the water main could result.
 Some vehicles maintain air on the shift cylinder continuously regardless of trans-
mission setting, and some only have air applied when the vehicle transmission is
in NEUTRAL.
 Use caution when servicing.
 Use only PAC-EASE Rubber Lubricant Emulsion (or equal) on the rubber
mechanical seal parts to ease installation. DO NOT use other lubricant types as
damage to the mechanical seal and seat could occur.
 Before connecting any cord sets or wiring harnesses, inspect the seal washer in
the connector.
 If the seal washer is missing or damaged, water can enter the connector causing
corrosion. This could resulting in possible system failure.