Hale Q Series Muscle - Manual (Page 173)

173 MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
Installation 
10 Installation
10.1 OVERVIEW
This section provides guidelines and recommendations for installing the midship mus-
cle pump assembly into your truck chassis.
10.2 MOUNTING
Also see Section “Installation and Parts Drawings,” located at the back of this manual.
 Plate # 923A ........ Qpak Installation
 Plate # 887A ........ Qmax Installation
 Plate # 884A ........ Qflo Installation
 Plate # 889A ........ Qtwo Installation
 Plate # 1159 ........ Qmax K
 Plate # 1173 ........ Qtwo K
IMPORTANT!
TO FULLY SUPPORT THE MIDSHIP MUSCLE PUMP ASSEMBLY, USE ALL MOUNTING
BOLT HOLES PROVIDED IN THE MIDSHIP PUMP HOUSING. ALSO SEE FIGURE 7-1:
“LIFTING EYEBOLT ATTACHMENT LAYOUT” ON PAGE 174.
WARNING!
THE MIDSHIP PUMP AND GEARBOX ASSEMBLY ARE HEAVY AND BULKY. ADDING
ACCESSORIES INCREASES THE WEIGHT. CHECK YOUR BILL OF LADING FOR THE
APPROXIMATE WEIGHT. BE CERTAIN TO USE PROPER LIFTING SUPPORT DEVICES
(I.E., OVERHEAD CRANE, JACK, CHAINS, STRAPS, ETC.) CAPABLE OF HANDLING
THE LOAD WHEN REMOVING OR INSTALLING THE MIDSHIP PUMP AND GEARBOX
ASSEMBLIES.
Mounting Holes
Two 1/2-13 tapped holes mounting holes are provided for 1/2-13 UNC eyebolts. (See
Figure 7-1: “Lifting Eyebolt Attachment Layout,” on page 174.)