Apple Final Cut Pro 6 - Manual (Page 180)

Chapter 12 Connecting Professional Video and Audio Equipment 179
III
Component YUV and Component RGB
Professional video equipment, such as Betacam SP decks, has component YUV (Y’C
B
C
R
)
video inputs and outputs. Component YUV separates color and brightness information
into three signals, which keeps the color quality more accurate than that of other
systems. Component YUV is as good as analog video gets. High-end consumer devices,
such as DVD players and televisions, have increasingly begun to support component YUV.
Note: Another form of component video, component RGB, is not as widespread on
professional equipment as component YUV.
Both component YUV and RGB signals use from three to five connectors. You can use
three BNC connectors, plus a fourth (typically labeled “genlock” or “house sync”) to
send a timing signal. Sync can also be embedded in the Y or G part of the signal (using
three connectors), a separate composite signal on a fourth connector, or separate
H and V drive signals (using five connectors). See your equipment’s documentation for
more information.
SCART
Consumer PAL equipment sometimes has a special connector called a SCART connector.
A SCART connector has multiple pins that run composite, component RGB, and stereo
audio in one bundle. SCART input or output can be broken up into individual
connections using special adapters available from video and home electronics stores.
Component
On some equipment,
you can switch between
RGB and YUV modes.
Y, or green C R , or red C B , or blue
YUV
RGB
SCART connector