Apple Final Cut Pro 6 - Manual (Page 941)

156 Part I Audio Mixing
Equalization Filters Available in Final Cut Pro
The following equalization filters are included with Final Cut Pro:
 3 Band Equalizer
 Band Pass Filter
 DC Notch
 High Pass Filter
 High Shelf Filter
 Low Pass Filter
 Low Shelf Filter
 Notch Filter
 Parametric Equalizer
Using Equalization Filters in Final Cut Pro
All of the Final Cut Pro EQ filters use a combination of three controls. This example
looks at the Parametric Equalizer filter:
 Frequency: This slider lets you select the audio frequency you want to boost or attenuate.
The lowest available frequency varies from 10 Hz for the High Pass filter to 80 Hz for the
3 Band Equalizer. The highest available frequency for all EQ filters is 20,000 Hz.
 Q: This slider adjusts the bandwidth of the filter resonance, whose frequency value
has been set with the Frequency slider.
 Gain: This setting controls how much you’ll be boosting or attenuating the specified
frequency range.