Apple Final Cut Pro 6 - Manual (Page 886)

Chapter 5 Using the Audio Mixer 101
I
Choosing an External MIDI Interface
There are a wide variety of MIDI interfaces available. When you select a MIDI interface,
consider the following:
 You need a MIDI interface that is compatible with Mac OS X.
 Most interfaces connect to your computer via the USB port, although some PCI and
FireWire audio interfaces include MIDI ports.
 You should purchase a MIDI interface that supports the number of control surfaces
you need, plus any additional MIDI equipment you may want to connect to
your computer.
Installing a MIDI Interface
In many cases, installing a MIDI interface is as simple as connecting the interface to
your computer. If your MIDI interface does not appear in the Control Surface
Configuration dialog, the MIDI interface may require driver software. This may be
included with the MIDI interface, or you may be able to download MIDI drivers from
the manufacturer’s website. Make sure you follow the installation instructions that
came with your MIDI interface.
To set up and connect a MIDI interface to your computer:
1 Install any MIDI drivers necessary for the MIDI interface.
2 Connect a USB cable between the USB port on your computer and the MIDI interface.
3 Make sure the MIDI interface is connected and turned on.
Choosing a Control Surface
Different control surfaces use slightly different communications protocols, so not all
control surfaces are compatible. Final Cut Pro supports Mackie and Logic Control
control surfaces and Mackie and Logic Control XT control surfaces.
Connecting a Control Surface
Once you have your MIDI interface connected to your computer, setting up a control
surface is simple.
To connect your control surface to your MIDI interface:
1 Connect the MIDI output port of the control surface to a MIDI input port on the
MIDI interface.
2 Connect a MIDI output port on your MIDI interface to the MIDI input port on your
control surface.
3 Make sure the control surface is turned on.
MIDI Connector