Apple Motion 3 - Manual (Page 846)

846 Chapter 10 Using Filters
The most recently applied filters appear at the top of the Filters tab of the Inspector.
When a filter is applied to an object, it is applied with the filter’s default settings. For
example, when you apply the Bevel border filter to an object, that object appears with
a border with the angle of the light hitting the bevel set to 0 degrees, the width of the
bevel set to 0.2, its opacity set to 0.8, and the color of the bevel’s light set to white. See
“
Bevel ” on page 869 for more details.
Adjusting Filters
Filters can be tailored to your specific needs by adjusting their parameters. The
parameters can be adjusted in a number of different ways, such as using sliders in the
HUDs, the controls in the Inspector, the onscreen controls, by adding keyframes, or by
applying parameter behaviors.
Filters tab