JLG 1100S Service Manual - Manual (Page 296)

SECTION 6 - JLG CONTROL SYSTEM
6-22 – JLG Lift – 3121256
MAIN LIFT: ACCEL X.Xs Displays/adjusts main lift acceleration 0.1 to 5.0 sec 1.0 1.0
DECEL X.Xs Displays/adjusts main lift deceleration 0.1 to 3.0 sec 1.0 1.0
MIN Up XX% Displays/adjusts minimum main lift up
speed 0 to 60% 10 10
MAX UP XX% Displays/adjusts maximum main lift up
speed 0 to 100% 62 62 75-100 75-100
MIN DOWN XX% Displays/adjusts minimum main lift
down speed 0 to 60% 10 10
MAX DOWN XXX% Displays/adjusts maximum main lift
down speed 0 to 100% 62 62 85-110 85-110
CREEP UP XX% Displays/adjusts maximum main lift up
speed
NOTE: used when creep switch on
pump pot is active 0 to 65% 50 50
CREEP DOWN XX% Displays/adjusts maximum main lift
down speed
NOTE: used when creep switch on
pump pot is active 0 to 75% 45 45
SWING: ACCEL X.Xs Displays/adjusts swing acceleration 0.1 to 5.0 sec 2.0 2.0
DECEL X.Xs Displays/adjusts swing deceleration 0.1 to 3.0 sec 1.5 1.5
MIN LEFT XX% Displays/adjusts minimum swing left
speed 0 to 50% 40 40
MAX LEFT XXX% Displays/adjusts maximum swing left
speed 0 to 100% 63 63 115-125 115-125
MIN RIGHT XX% Displays/adjusts minimum swing right
speed 0 to 50% 40 40
MAX RIGHT XXX% Displays/adjusts maximum swing right
speed 0 to 100% 65 65 115-125 115-125
CREEP LEFT XX% Displays/adjusts maximum swing left
speed
NOTE: used when creep switch on
pump pot is active 0 to 65% 50 50
CREEP RIGHT XX% Displays/adjusts maximum swing right
speed
NOTE: used when creep switch on
pump pot is active 0 to 65% 50 50
Table 6-3. Personality Ranges/Defaults
SUBMENU
(DISPLAYED ON
ANALYZER 1ST
LINE)
PARAMETER
(DISPLAYED ON ANALYZER
2 ND LINE)
DESCRIPTION RANGE
DEFAULT VALUES
TIME RANGE (SEC)
(SEE SECTION 6.10
FOR MACHINE
ORIENTATION WHEN
SETTING SPEEDS)
1100S 1100SJP 1100S 11100SJP