JLG 1100S Service Manual User Manual
Page 336
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-62
– JLG Lift –
3121256
13. Hit enter. The number displayed will be the value
that the crack point is set to. The screen will show:
14. Hit Enter. The screen will read:
15. Hit Enter. The screen will read:
16. Repeat steps 10 thru 12 for the Tele In function.
17. After completing all the Tele Calibrations, hit ESC
twice to go back to CALIBRATIONS.
Advertising
This manual is related to the following products: