Boom sensor calibration position 4 -72 – JLG 1100S Service Manual User Manual
Page 346
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-72
– JLG Lift –
3121256
26. Press Enter. The screen will read:
Swing the machine back 180 degrees (centered
over original end of chassis) for Calibration Position
4.
When the machine is in the proper position, hit
Enter. The screen will read:
When Position 4 calibrating is complete, the screen
will read:
Figure 6-17. Boom Sensor Calibration Position 4
Advertising
This manual is related to the following products: