JLG 1100S Service Manual - Manual (Page 333)

SECTION 6 - JLG CONTROL SYSTEM
3121256 – JLG Lift – 6-59
10. Hit Enter. The screen will read:
11. Hit Enter again. The screen will read:
12. Activate the Lift Up function by fully stroking the joy-
stick until the boom starts to move, then leave off
immediately. The display will read CRK PT = and
show the numeric crack point value.
13. Hit enter. The number displayed will be the value
that the crack point is set to. The screen will show:
14. Hit Enter. The screen will read:
15. Repeat steps 10 thru 12 for the Lift Down function.
16. After completing all the Tele Calibrations, hit ESC
twice to go back to CALIBRATIONS.