JLG 1100S Service Manual User Manual
Page 73
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3121256
– JLG Lift –
3-31
6. Loosen the M10x25 flathead socket screws and
remove the planetary ring without damaging the O-
Ring.
7. Remove the release joint together with the spring.
8. Disassemble the Ø40 outer snap rings and using an
extractor remove the planetary gears from the spin-
dle pins.
9. Loosen the M6x6 socket headless screws and also
remove the 3/16" balls.
10. Loosen the ring nut using the special wrench.
11. Remove the hub support together with the roller
bearing inner track.
Advertising
This manual is related to the following products: