Boom sensor calibration position 3 -71 – JLG 1100S Service Manual User Manual
Page 345
Advertising
SECTION 6 - JLG CONTROL SYSTEM
3121256
– JLG Lift –
6-71
25. Swing 180 degrees (centered over opposite end of
chassis) for Calibration Position 3.
When the machine is in the proper position, hit
Enter. The screen will read:
When Position 3 calibrating is complete the screen
will read:
Figure 6-16. Boom Sensor Calibration Position 3
Advertising
This manual is related to the following products: