Disassembly, Disassembly -30 – JLG 1100S Service Manual User Manual
Page 72
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-30
– JLG Lift –
3121256
Disassembly
1. Remove the plugs and pour the lubricant in a con-
tainer.
2. Release the screws to disassemble the motor flange
taking care not to damage the O-Ring.
3. Release the screws from the release cover and pull
the pin out.
4. Remove the BR250 ring and pull the cover out
avoiding to damage the O-Ring.
5. Pull the reduction gears out.
Advertising
This manual is related to the following products: