JLG 1100S Service Manual - Manual (Page 83)

SECTION 3 - CHASSIS & TURNTABLE
3121256 – JLG Lift – 3-41
Motor and Brake Disassembly
1. With unit resting on bench with Motor (10) end up,
loosen Hex Bolts (29) and remove Lift Lugs (28)
from the Motor (10).
2. Pull Motor (10) straight up and remove Motor (10)
from Brake (26).
3. Remove Gasket (31) from between Brake (26) and
Motor (10).
4. Remove Brake (26) from Main Torque-Hub Assem-
bly and dump oil out of Brake (26).
5. Remove O-ring (27) from between Motor (10) and
Brake (26).
10. Hydraulic Motor
26. Hydraulic Brake
27. O-Ring 28. Lift Lug
29. Bolt
31. Gasket
Figure 3-34. Swing Drive - Motor and Brake Disassembly