JLG X500AJ Operator Manual - Manual (Page 129)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121636 – JLG Lift – 6-19
Menu Input
The signals that arrive at the board from the various sensors
mounted on the machine and from the platform/remote
control commands are displayed. The status of the input and
the following selection to scroll the menu appears for each
screen:
1 - PREV - access the previous input
2 - NEXT - access the successive input
9 - ESC - escape from the INPUT menu
ST1 GND A
ON
Outrigger N° 1 on the ground – the switch is released and A line is closed
OFF Outrigger N° 1 lifted – the switch is pressed and A line is opened
ST1 GND B
ON Outrigger N° 1 on the ground – the switch is released and B line is closed
OFF
Outrigger N° 1 lifted – the switch is pressed and B line is opened
ST1 OPEN A
ON
Do not consider
OFF Do not consider
ST1 OPEN B
ON
Do not consider
OFF
Do not consider
ST2 GND A
ON
Outrigger N° 2 on the ground – the switch is released and A line is closed
OFF Outrigger N° 2 lifted – the switch is pressed and A line is opened
ST2 GND B
ON Outrigger N° 2 on the ground – the switch is released and B line is closed
OFF
Outrigger N° 2 lifted – the switch is pressed and B line is opened