JLG X500AJ Operator Manual - Manual (Page 70)

SECTION 4 - MACHINE OPERATION
4-20 – JLG Lift – 3121636
4.9 BATTERY CHARGING - GAS/AC-ELECTRIC
NOTE: Be sure that the machine is parked in a well ventilated
area free of flames and sparks.
• Only plug the charger into a properly grounded outlet.
• Do not use ground adaptors or modify plug. Do not
touch non-insulated portion of output connector or
non-insulated battery terminal.
• Always disconnect the AC supply before making or
breaking the connections to the battery.
• Do not open or disassemble charger.
• Do not operate charger if the AC supply cord is dam-
aged or if the charger has been damaged in any way.
Battery Charging - Daily
BEFORE CONNECTING THE BUILT-IN CHARGER TO THE RECEPTACLE,
ENSURE THE KEY ON THE ENGINE IS POSITIONED TO OFF.
The machine has a built-in battery charger. To activate this
feature connect the machine to an appropriately grounded
AC receptacle and activate the charging switch behind the
clear plastic door. (See photo) Verify the battery disconnect
switch is on.