JLG 1230ES Operator Manual - Manual (Page 26)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-6 – JLG Lift – 3121221
3. With the platform in the transport (stowed) position.
a. Drive the machine on a grade, not to exceed the
rated gradeability, and stop to ensure the brakes
hold.
b. Check the tilt indicator light/alarm to ensure
proper operation. The light/alarm should be acti-
vated when tilted at or beyond the values in Table
2-2.
NOTE: When the tilt indicator warning is activated the following
functions are affected;
ANSI/CSA/AUS Spec. - Drive and Lift functions are dis-
abled, platform must be lowered (stowed) to drive out of
tilt condition.
CE Spec. - Drive and Lift function are NOT disabled.
Table 2-2. Tilt Cutout Settings
1230ES
Tilt Setting
(front to back)
Tilt Setting
(side to side)
ANSI/CSA 3° 1.5°
CE/AUS 3.4° 3.4°