JLG 1230ES Operator Manual - Manual (Page 89)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121221 – JLG Lift – 6-25
812 NO DATA FROM TILT SENSOR - NOT CON-
NECTED OR FAULTY No signal from tilt sensor. Refer problem to a qualified JLG mechanic.
8-1 Tilt Sensor
DTC FAULT MESSAGE DESCRIPTION CHECK
8-2 Platform Load Sense
DTC FAULT MESSAGE DESCRIPTION CHECK
821 LSS CELL #1 ERROR A problem has been detected with the load
sense system. Refer problem to a qualified JLG mechanic.
822 LSS CELL #2 ERROR A problem has been detected with the load
sense system. Refer problem to a qualified JLG mechanic.
823 LSS CELL #3 ERROR A problem has been detected with the load
sense system. Refer problem to a qualified JLG mechanic.
824 LSS CELL #4 ERROR A problem has been detected with the load
sense system. Refer problem to a qualified JLG mechanic.
825 LSS HAS NOT BEEN CALIBRATED The load sensing system module has not
been calibrated Refer problem to a qualified JLG mechanic.