JLG 1230ES Operator Manual - Manual (Page 50)

SECTION 4 - MACHINE OPERATION
4-8 – JLG Lift – 3121221
Raising Platform
1. If the machine is shut down, place the platform/
ground select switch to the desired position (platform
or ground).
2. Position both the ground control station and platform
control station emergency stop switches to the on
position.
From Ground Control Station
1. If operating from the ground controls -
Position the lift switch (1) to up and hold until desired
elevation is achieved.
DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSONNEL IN
THE PLATFORM EXCEPT IN AN EMERGENCY.
Figure 4-6. Raising Platform From Ground Control
1