JLG 1230ES Operator Manual - Manual (Page 58)

SECTION 4 - MACHINE OPERATION
4-16 – JLG Lift – 3121221
4.10 TIE DOWN/LIFT LUGS
See Figure 4-15. on page 4-17
Tie Down
When transporting the machine, the platform must be fully low-
ered in the stowed position with the machine securely tied
down to the truck or trailer deck. There are two tie-down/lift
lugs located at the front and rear of the machine for tieing
down.
Lifting
Reference Figure 4-15. for proper locations when lifting
machine. The machine can be lifted using a proper spreader bar
and straps/chains only, see Figure 4-15. on page 4-17.
The machine may also be lifted using a fork truck. Lift only with
the platform in the stowed position (pot hole protection bars in
the up position). Adjust the spread of the fork truck lifting tines
(1) to just inside the machines front and rear wheels, see below.
Figure 4-14. Tie Down and Lift Lug Locations.