JLG 1230ES Operator Manual - Manual (Page 51)

SECTION 4 - MACHINE OPERATION
3121221 – JLG Lift – 4-9
From Platform Control Station 1. If operating from the platform controls -
Set the lift/drive select switch to lift (1), squeeze and
hold the red trigger switch (2), move the joystick
backward (3) (platform up) and hold until desired ele-
vation is reached. Releasing the red trigger switch or
moving the joystick back to it’s centered position will
stop the function being operated.
NOTE: To ensure proper orientation of the desired platform func-
tion, match the color (black/white) of the directional
arrow (4), to the lift/lower arrow (5) on the platform con-
trol indicator panel.
Figure 4-7. Raising Platform From Platform Control