Round bar/poly bar removal, Round bar/poly bar removal -5 – JLG 740AJ Service Manual User Manual
Page 221
Advertising
SECTION 4 - BOOM & PLATFORM
3121160
– JLG Lift –
4-5
Round Bar/Poly Bar Removal
1. Use a small ¼” ratchet with a T-25 Torx bit. Remove
the 10-24 x 0.812 screw. (If the bar spins then grip
the bar and poly tightly with a vise-grip).
2. Lift up one end of the bar and slide the poly roller off.
3. While gripping the bar tightly, remove the other 10-
24 x 0.812 screw.
Advertising