JLG 740AJ Service Manual - Manual (Page 26)

SECTION 1 - SPECIFICATIONS
1-6 – JLG Lift – 3121160
1.17 CYLINDER SPECIFICATIONS
Table 1-21. Mobil DTE 13M Specs
ISO Viscosity Grade #32
Specific Gravity 0.877
Pour Point, Max -40 °F (-40°C)
Flash Point, Min. 330 °F (166°C)
Viscosity
at 40° C 33cSt
at 100° C 6.6 cSt
at 100° F 169 SUS
at 210° F 48 SUS
cp at -20° F 6,200
Viscosity Index 140
Table 1-22. Mobil EAL 224H Specs
Type Synthetic Biodegradable
ISO Viscosity Grade 32/46
Specific Gravity .922
Pour Point, Max -25°F (-32°C)
Flash Point, Min. 428°F (220°C)
Operating Temp. 0 to 180°F (-17 to 162°C)
Weight
7.64 lb. per gal.
(0.9 kg per liter)
Viscosity
at 40° C 37 cSt
at 100° C 8.4 cSt
Viscosity Index 213
NOTE: Must be stored above 32°F (14°C)
Table 1-23. UCon Hydrolube HP-5046
Type Synthetic Biodegradable
Specific Gravity 1.082
Pour Point, Max -58°F (-50°C)
pH 9.1
Viscosity
at 0° C (32° F) 340 cSt (1600SUS)
at 40° C (104° F) 46 cSt (215SUS)
at 65° C (150° F) 22 cSt (106SUS)
Viscosity Index 170
Table 1-24. Exxon Univis HVI 26 Specs
Specific Gravity 32.1
Pour Point -76°F (-60°C)
Flash Point 217°F (103°C)
Viscosity
at 40° C 25.8 cSt
at 100° C 9.3 cSt
Viscosity Index 376
NOTE: Mobil/Exxon recommends that this oil be
checked on a yearly basis for viscosity.
Table 1-25. Cylinder Specifications
DESCRIPTION BORE STROKE ROD DIA.
Lower Lift
8.00
(203.2)
49.38
(1254.1)
3.00
(76.2)
Upright Level
8.00
(203.6)
42.00
(1066.8)
3.50
(88.9)
Upper Lift
8.00
(203.2)
28.75
(730.3)
3.50
(88.9)
Upper Telescope
3.50
(88.9)
206.5
(5245.1)
2.75
(69.9)
Steer
3.00
(76.2)
10.75
(273.1)
1.50
(38.1)
Lockout
4.00
(101.6)
3.88
(98.4)
1.50
(38.1)
Master
3.50
(88.9)
18.50
(469.9)
1.50
(38.1)
Slave
3.50
(88.9)
17.50
(444,5)
1.50
(38.1)
Lift (Jib)
3.00
(76.2)
25.50
(647.7)
1.50
(38.1)