2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 - Manual (Page 32)

Table of Parameters 3.2
32
Busy tone - cadence Function No.: 125
Busy tone cadence setting.
Setting options: 330/330 ms (0) -cadence 330 ms tone, 330 ms pause
200/200 ms (1) -cadence 200 ms tone, 200 ms pause
250/250 ms (2) -cadence 250 ms tone, 250 ms pause
375/375 ms (3) -cadence 375 ms tone, 375 ms pause
500/500 ms (4) -cadence 500 ms tone, 500 ms pause
Default setting: 330/330 ms
Ring back tone – frequency 1 [Hz] Function No.: 126
Setting of frequency 1 of ringback tone. This tone is send after dialing end,
before the mobile network starts to generate its own Ringback tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz
Default setting: 425 Hz
Ringback tone – frequency 2 [Hz] Function No.: 127
Setting of frequency 2 of ringback tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz
Default setting: 425 Hz
Ringback tone - cadence Function No.: 128
Ringback tone cadence setting.
Setting options:
OFF (0) -not generated, only network tone
1000/4000 ms (1) -cadence 1 s tone, 4 s pause
400/200/400/2000 ms (2) -cadence 2x400 ms tone,
2 s pause
1500/3500 ms (3) -cadence 1,5 s tone, 3,5 s pause
2000/4000 ms (4) -cadence 2 s tone, 4 s pause
Default setting: OFF
Tone after disconnection Function No.: 129
If the remote subscriber hangs up first, the EasyGate subscriber can hear the
tone selected here.
Setting options: Busy (0)-EasyGate transmits the busy tone upon call
end.
Permanent (1) -EasyGate transmits the permanent tone
upon call end.
Default setting: Busy tone