Gsm or umts routing parameters, Table of parameters 3.2 – 2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 User Manual

Page 37

Advertising
background image

Table of Parameters

3.2

37

Setting step:

1 s

Default setting:

0 s

Time limit [min]

Function No.: 399

After time elapsing is call connection terminated immediately. You can hear beep

30s before end of call. 10s before end you can hear beep every second. The "0"

setting means that the function is disabled.

Setting options:

0-255 min

Setting step:

1 min

Default setting:

0 (disabled)

Bank No

Function No.: -

Special function – with FW 1.5x and 3.5x only. Don’t use this parameter and the

menu ‘Free minutes bank’, with detailed setting of free minutes banks, for

standard Easy Gate.

GSM or UMTS routing parameters

Incoming calls from mobile network contain the CLI. According to received CLI Easy

Gate can do following:

· Reject the call;

· Use function CallBack – automatic call to the GSM subscriber;

· Automatic dial in. EasyGate dials preprogrammed PBX subscriber number (for

example switchboard operator) to be connected with calling subscriber.

FXS line Off-Hook to DISA timeout [ms]

Function No.: 500

Timeout between FXS line Off-Hook and automatic dial in according to parameter

"Dial in" in the table.

Setting options:

100-25500 ms

Setting step:

100 ms

Default setting:

2000 ms

Max. ring time for CallBack

Function No.: 502

Parameter sets up a behaviour for CallBack function. You've got 2 options how to

use a Callback on the FXS port:
Simple CallBack - set up for 0. During an incoming call the FXS port gives a

ringing. When the FXS port is off-hooked an incoming call is rejected and after

10s the gateway calls back. During those 10s the caller must hang up to be

ready for answering the callback call. On the FXS port a melody is played.
Advanced Callback - set up for 1-255. During an incoming call the FXS port gives

a ringing. If the caller wants to use a callback functionality he/she must hang up

before the parameter Max. ring time for Callback runs out. The gateway then

calls back immediately. If the call is answered on the analog side earlier the

called party hears the melody. If the call is answered on the mobile network side

Advertising