2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 - Manual (Page 43)

Table of Parameters 3.2
43
Telephone number for service SMS
Telephone number for service SMS. The number is common for GGMC SMS, for
"LOW CREDIT" SMS on prepaid SIM cards and for battery status SMS. To be set in
part Service.
Service
Hardware version
EasyGate hardware version - for information only (cannot be modified). Must be
used for communication with the manufacturer.
Firmware version
EasyGate firmware version - EasyGate central processor program version. The
manufacturer can issue upgrades to extend functions. To load new firmware into
EasyGate use the Upgrade function. Keep communicating with the manufacturer.
Serial number
EasyGate serial number - for information only (cannot be changed). Must be used
for communication with the manufacturer.
Blocked to operator
Refer to GSM & SIM Parameters.
COM enable Function No.: 960
With this parameter you can enable/disable the serial interface function. You can
disable communication in the operating mode, maintaining the special
programming mode after power up.
Setting options: YES/NO
Default setting: YES
Time limit for data connections Function No.: -
After time elapsing is data/fax connection terminated immediately without
warning. The "0" setting means that the function is disabled.
Setting options: 0-255 min
Step: 1 min
Default setting: 0