Using free minutes option – step by step, Free minutes option 4.6 – 2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 User Manual

Page 64

Advertising
background image

Free minutes option

4.6

64

Using Free minutes option – step by step

1. If your gateway is preset by supplier to be used with some billing

scheme, you can continue with step 6

2. Collect all information about billing scheme you use from your operator.

3. You have to set parameters by PCManager. Connect the gateway to

your PC by serial cable and to power by adapter. When the gateway is

connected to network, you can set it by PCManager.

4. Set the table “FXS routing table”. Prefixes for different operators and

Free minutes bank should be used to divide calls to groups. The maximal

amount of groups – banks is 4. The maximal number of prefixes is 20

(number of lines in table).

5. Set the table “Free minutes bank”. You have to decide, if call with empty

bank will be permitted. Than fill the day, when the billing period starts.

Finally fill the table with rules for free minutes bank according to your

operator billing.

6. Set local prefix for fixed line, dependent on place where the gateway is

used.

7. Set the actual time, either by PCManager – monitor or by DTMF direct

access. When the time information is provided by network, this step is

not required.

8. If you have actually full amount of free minutes, you can use command

“Refill now”.

9. The gateway is now registering your calls and counting free minutes

from operator.

10. When the gateway is switched off for more than 5 hours and the time

information is not provided by network, you have to check, if the time is

set (see setting of the date and time).

11. Information about state of used free minutes is saved in memory

independent on power. This information is actualized after every call.

Warning

n

The free minutes counting is intended to give information to user about

the state of his free minutes account. For billing is the registration done by

operator valid. When the difference between operator evidence and free
minutes counting occur, the billing is done according operator accounting.

Advertising