2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 - Manual (Page 44)

Table of Parameters 3.2
44
Telephone number for service SMS Function No.: 714
Telephone number for service SMS. The number is common for GGMC SMS and
"LOW CREDIT" SMS on prepaid SIM cards.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Time period for GGMC SMS [h] Function No.: 970
Time interval for GGMC SMS sending. GGMC = GSM Gateway Monitoring Centre.
The "0" setting means that the function is disabled.
Setting options: 0-255 h
Step: 1 h
Default setting: 0
Battery status SMS Function No.: 962
Setting of this parameter allows sending SMS with information with battery status.
Disconnecting of battery (Battery Error) and connecting of battery (Battery Ready)
and critically low voltage (Battery flat) is reported by SMS.
Setting options: enable (1)
disable (0)
Default setting: disable
Power failure SMS Function No.: 963
Mains status can be reported when this parameter is set. The report about mains
failure and recover is sent with defined delay (Power off/on).
Setting options: disable (0)
Enable with delay 1-255 min
Default setting: disable
Initialization
All programmable parameters are arranged in tables according to their functions. You
can initialize either all parameters at once or one table of parameters.
Telephone line initialization FXS Function No.: -
Initialization of all parameters necessary for the telephone line FXS.
Call table initialization FXS Function No.: -
Initialization of all parameters related to FXS routing table.
Call table initialization GSM Function No.: -
Initialization of all parameters related to the routing table from mobile network.