2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 - Manual (Page 50)

Voice function 4.1
50
Call forwarding
For forwarding activation you must specify <Telephone number> the calls will be
forwarded to. You may specify <Call type>, if you want to forward specified call type
only. You may specify <Delay time> in seconds for forwarding if no answer too.
Description of <Call type> field codes:
Voice:
Data:
Fax:
Call forwarding unconditional
If activated, incoming calls will be always forwarded to the configured telephone
number.
Activation for all call types:
<Telephone number>
Activation for selected call type:
<Telephone number> <Call type>
Deactivation:
Status check:
Call forwarding if busy
If activated, incoming calls will be forwarded to the configured telephone number if
there is call in progress on EasyGate.
Activation for all call types:
<Telephone number>
Activation for selected call type:
<Telephone number> <Call type>
Deactivation:
Status check: