2N VoiceBlue Enterprise - User Manual - Manual (Page 103)

8
S E C T I O N 8 –
Routing of calls from GSM
Processing of the incoming calls from the GSM
network is realised simply by the gateway by
routing of the incoming call into the VoIP
network to one particular number. The routing
may be set for each SIM card of GSM module
separately.
During processing of the incoming calls from the
GSM side, the automat firstly tries the service
Operator according to the GSM module, then
according to the number of SIM card. After the
service is found, the line, which is assigned to the
operator service, is selected for the outcoming
call. Finally, the calling number in normalised according to the
normalisation table.
8.1. Setting of the operator service
Routing setting is realised by clicking to the
GSM routing reference. Firstly must be set the
operator service. Clicking to the Operator
Searching of
outgoing line
Output
normalisation
Service
searching