2N VoiceBlue Enterprise - User Manual - Manual (Page 26)

3-2 2N
®
VoiceBlue Enterprise
3.1. Before You Start Configuring…
The following values are set for the 2N VoiceBlue Enterprise
gateways by the manufacturer:
Serial console communication port:
Transmission rate: 115200
Data bits: 8
Parity: none
Flow control: none
Network parameters:
IP address: 10.0.0.1
Network mask: 255.0.0.0
Having unpacked the gateway, you can configure it using any of
the following two ways:
1) Connect it to your PC via a serial link (refer to Subsection 2.8)
and set the basic network parameters using a terminal
communication program, e.g. HyperTerminal. Then connect
yourself to the gateway through a web browser to complete the
setting procedure.
2) Interconnect the gateway with your PC using a crossed
Ethernet cable, set an arbitrary IP address for the PC from the
network 10.x.y.z, other than 10.0.0.1, and set the required IP
address for the gateway using a web browser. Having changed
the IP address, connect both the PC and gateway to the LAN in
a standard way and complete the configuration process using
your web browser.
Let us discuss the two ways in the subsections below.