2N VoiceBlue Enterprise - User Manual User Manual

Page 42

Advertising

3-18 2N

VoiceBlue Enterprise

nat=<nat address> - specifies NAT IP address

no_route_code=<no route code> - specifies No route code

desc=<description> - specifies Description

replace linenr=<line number> - replaces SIP line with <line
number> specified. If

SIP line list is empty, this command is not allowed, same
parameters as for previous

command are possible, if some parameter is omitted when
replacing, original value will be used

del <linenr> - deletes SIP line with a <linenr> specified

Example: There is one SIP line in a list. User decides to add new
one with no parameters

specified (all parameters will be set to default values). Then he
decides to change Codecs to value g711alaw, Register expiration
time to 5000 and to enable CLIP.

Command line shell, type help for more information or type exit to
quit

>sip ls

linenr=25

server=172.20.172.196

name="1111"

disp_name="1111" listen_port=5061 us

er="vbegw"

codecs=g711alaw;g711ulaw;g729

add_to_req=

reg_exp=0 REGISTER nat_b=0

nat_r=0 nat= no_route_code=0 desc="SIP line"

>sip add

No parameters identified, default values will be set

Added successfuly