2N VoiceBlue Enterprise - User Manual - Manual (Page 51)

Administration 3-27
Web Browser Access
If you can get connected to the gateway with a web browser and
know the administrator password, you can set the network
parameters in the Network Configuration menu in the Setting
bookmark. When the menu is opened, the current network setup is
displayed. To get into the form for changes click on the Modify
link located on the right under the network parameter table. A
form gets displayed in the browser as shown in fig. 13.
Fig. 13 – Network Parameter Setting by Web Browser
The form contains the following fields:
•
Enable DHCP – a mark indicating that the network parameters
should be gained from the DHCP server or set manually.
•
IP address – the gateway IP address. If the dynamic address
assignment function using the DHCP is enabled, the value
cannot be changed manually.
•
Network mask – the network mask. If the dynamic address
assignment function using the DHCP is enabled, the value
cannot be changed manually.