2N VoiceBlue Enterprise - User Manual - Manual (Page 38)

3-14 2N
®
VoiceBlue Enterprise
>lcr ls
idx=0 destination="lcr1" prefix=.* enabled route="gsm1"
priority=cycle desc="fir
st lcr"
idx=1 destination="lcr3" prefix=.* enabled route="sip" priority
desc="third lcr
"
idx=2 destination="lcr2" prefix=755 enabled route="all gsm"
priority=first_free
desc="second lcr"
>
>lcr shift from=2 to=0
Processing, please wait
Shifted successfuly
>
>lcr ls
idx=0 destination="lcr2" prefix=755 enabled route="all gsm"
priority=first_free
desc="second lcr"
idx=1 destination="lcr1" prefix=.* enabled route="gsm1"
priority=cycle desc="fir
st lcr"
idx=2 destination="lcr3" prefix=.* enabled route="sip" priority
desc="third lcr"
3.2.2.1.6 Command ‘route’
Command route allows you to set, modify and delete routes. There
are following parameters to this command:
help - prints short help
list [<idx>] - prints a list of all routes or lists only route with an
<idx> specified