2N VoiceBlue Enterprise - User Manual - Manual (Page 122)

10-10 2N
®
VoiceBlue Enterprise
Fill to the field To: for proper sending of the e-mail you have to
know the domain name, previously set in your VBE, in case, that
you enter an incorrect domain name, VBE reject this message.
Example: domain name is 2n.cz, receiver telephone number is
+420 123 456 789, in field To make entries as follows:
[email protected]. Fill in the field Subject and then write the
message. You can use national characters in text but supported
encoding is UTF-8 only. Format of message must be Plain text.
Example of SMS message sent through VBE SMTP server
Click on Send button. If your message is sent correctly, it will
appear in Outgoing messages. You can see already sent message in
web-based interface of VBE, SMTP server send the messages
through Admin account, i.e. you can see the message in the Sent
directory after login to Admin account in VBE (tuck SMS, item
SMS).
Receiving e-mails through VBE POP3: SMS message sent to the
number of the sim card in VBE could be downloaded as the e-mail
in two ways. Either you click on Send and receive button, or you
open the menu bellow this button and chose item Incoming
messages in the menu Only <IP_address of_VBE>. All the SMS
messages, which are saved in VBE in logged in account, will be
downloaded.