2N VoiceBlue Enterprise - User Manual - Manual (Page 80)

6-8 2N
®
VoiceBlue Enterprise
•
Gatekeeper address – If not determined by network retrieval,
the gatekeeper address must be entered in this field.
•
Gatekeeper name – the name of Gatekeeper to which the line
is to log in.
•
Gateway address – the address of the gateway to be used for
calling if the gateway calling method is selected.
•
Gateway prefix(es) – the prefixes used by gateway for
registration.
•
Endpoint type – the gateway can register itself to Gatekeeper
either as a gateway for a prefix (destinations starting by the
prefix are routed through the gateway) or as a terminal (virtual
telephone).
•
Display name – the text to be displayed to the called line.
•
Numbers – numbers of the line working in the terminal mode.
•
Listen port – the TCP port on which the line receives H.323
connections.
•
Disable Fast start – The Fast start method provides faster
start of the voice stream while a new H.323 connection is
setting up.
•
Disable H.245 tunnelling – disallows using of H.245
tunnelling.
•
Disable Early media start – disallows using of Eary media
strat method. This method establishes the voice channel before
the call is wholly set up. It’s useful for transmission of so
called “progress tones” from the GSM network.
•
DTMF type – choose the set of supported DTMF tones; either
numbers only (the Signal option) or all of alphanumeric
characters (the Alphanum option).
•
Transfer method – calls can be transferred either by the Call
forwarding method or the H.452.2 call transfer method.
•
Codecs – a list of codecs to be provided by the gateway for
voice channel negotiations.
•
Rejected call code – code which gateway returns back to
gatekeeper/gateway in case of rejected call.