2N VoiceBlue Enterprise - User Manual - Manual (Page 35)

Administration 3-11
linenr=19 c_meth=D d_meth=AUTO gk_addr= gk_name=""
gw_addr= prefixes= endpt=T di
sp_name= numbers=1222 listen_port=1720 dtmf=SIG t_meth=CF
codecs=g711alaw rej_ca
lls=0 no_route=0 desc=""
linenr=28 c_meth=GK d_meth=AUTO gk_addr= gk_name=""
gw_addr= prefixes= endpt=T d
isp_name= numbers=1234 listen_port=1720 dtmf=SIG t_meth=CF
codecs= rej_calls=0 n
o_route=0 desc=""
>
>h323 replace linenr=28 disp_name="my name" desc="new h323
line" F_S_DIS
Replaced successfuly
>
>h323 ls
linenr=19 c_meth=D d_meth=AUTO gk_addr= gk_name=""
gw_addr= prefixes= endpt=T di
sp_name= numbers=1222 listen_port=1720 dtmf=SIG t_meth=CF
codecs=g711alaw rej_ca
lls=0 no_route=0 desc=""
linenr=28 c_meth=GK d_meth=AUTO gk_addr= gk_name=""
gw_addr= prefixes= endpt=T d
isp_name=my name numbers=1234 listen_port=1720 F_S_DIS
dtmf=SIG t_meth=CF codecs
= rej_calls=0 no_route=0 desc="new h323 line"
>
3.2.2.1.5 Command ‘lcr’
Command lcr allows you to set, modify, delete and shift LCRs.
There are following parameters to this command:
help - prints short help