2N VoiceBlue Enterprise - User Manual - Manual (Page 117)

SMS Server 10-5
the left-hand mouse button and then click on the arrow pointing at
the other list.
10.3. SMS sending by SMTP/POP3
POP3 server: provides SMS downloading from VBE via e-mail.
Authorization goes through USERNAME and PASSWORD,
which are used for registering to web-based interface of VBE.
Each SMS will be changed to e-mail in the Inbox directory, after
successful authorization of VBE. There will be SMS sender tel.
number@domain name and SMS receiver tel. number@ domain
name (domain name could be set through web-based interface,
according to fig 58 in the header of e-mail, subject of the
message will be filled according to VBE settings (fig 58). You can
use formatting strings in the text as well (%n – sender number, %u
– receiver number, %d – date).
Message, which is already read, could be deleted from POP3
server. You can delete the message from VBE, or mark it as
already read (i.e. it is still available in the Inbox directory through
web-based interface, but POP3 server can not see it, fig. 58). It
depends on the settings.
SMTP server: provides sending e-mail messages as SMS from
VBE. USERNAME and PASSWORD for authorization are the
same as the USERNAME and PASSWORD for web-based
interface of VBE. Authentication could be set in web-based
interface of VBE. Domain name must be equal to POP3 domain
name (fig 58). Server awaits e-mail in format Text/Plain,
Text/HTML, Multipart/Mixed or Multipart/Alternative. From the
message in format Text/HTML, only the body of HTML message,
without formatting, is put onto the SMS message. From messages
Multipart/Mixed and Multipart/Alternative only the first part of
message is used, enclosed between strings, mentioned in the
header under name “boundary“.
Server supports the only messages in 7 bit or 16 bit format in
encoding according to ISO-8859-1 (messages with the different
encoding could be illegible after receiving message in form of
SMS). SMTP server enables sender IP address control as well as
authentication. With help of web-based interface, you can enable