2N VoiceBlue Enterprise - User Manual - Manual (Page 50)

3-26 2N
®
VoiceBlue Enterprise
The menu in fig. 12 contains the following items:
•
Address – the IP address of the gateway. If the dynamic
address assignment function using the DHCP is enabled, the
value cannot be changed manually.
•
Network mask – the network mask. If the dynamic address
assignment function using the DHCP is enabled, the value
cannot be changed manually.
•
Gateway – the initial router IP address. It is used for routing of
data traffic beyond the network limits. If the dynamic address
assignment function using the DHCP is enabled, the value
cannot be changed manually.
•
Dns1 – IP address of the 1
st
DNS server.
•
Dns2 – IP address of the 2
nd
DNS server.
•
Host name – the network name of the GSM gateway.
•
Domain – domain name.
•
Location – any text that describes the gateway location. This
value is published through the SNMP (in special versions of
firmware).
•
Contact – a text containing the gateway administration contact
information. This value is published through the SNMP (in
special versions of firmware).
•
Dhcp – a mark of the dynamic address assignment function. If
it is selected, the gateway gets its network settings from the
DHCP server. If not, the values must be entered manually.
•
Class – the equipment class name that is sent in the network
setting sending request. This string can help the DHCP server
distinguish different types of equipment and assign
configuration parameters to them accordingly.
The Dhcp or Address/Network mask parameters at least must be
set correctly for the gateway communication to be established
within the TCP/IP network. The address of one DNS at least
should be set too.