Gateway control, Firmware / licence – 2N BRI Lite/Enterprise v1.8 User Manual

Page 51

Advertising
background image

51

2N TELEKOMUNIKACE a.s., www.2n.cz

®

Gateway Control

Gateway control helps you:

Monitor the current state of each GSM gateway parts;
Check and set the GSM gateway licence;
View and save the LOG file and CDR.

Firmware / Licence

Use this window to display information on the gateway licence status, firmware and
bootware versions and Ethernet interface MAC address. Use the web interface to
download

a new licence via Management Licence.

/

Firmware version – displays the current firmware version for the GSM gateway
connected.
Bootware version – displays the current bootware version for the GSM gateway
connected.
MAC address – shows the MAC address of the GSM gateway Ethernet interface.
CPU serial number – shows the GSM gateway serial number in the
M203–xxxxxxxxxx.bin format.
Active – protocols allowed by the licence:

SIP – SIP support;
MExx – Mobility Extension support, where 'xx' means the maximum count
of users;
G729 – G.729ab voice codec support;
DSS1 – ISDN BRI DSS1 protocol support;

TUN – GSM–CSD remote supervision support.

SMSU – count

of SMS users.

SMSS

– SMPP support.

SMSE –

SMS@email support.

SMSW –

SMS via web support.

SNMP – SNMP monitoring support.

Gateway limitation – displays the gateway operation limit (or licence limitation).
Licence status – displays the current licence status (unlocked/locked).

Networks – displays the list of allowed/disallowed GSM/UMTS networks.

Licence key for gateway – helps you insert a new GSM gateway connection
licence.

Caution

When the licence code expires, the licence–based protocols will be locked!

Tip

Upon the dealer's request, the gateway may be locked against certain
types of GSM/UMTS networks. This state is signalled by a red LED Ch
1/Ch 2 and a 'netw–err' cause in the GSM module diagnostic window.
Contact your dealer please for more information.

Advertising