Smtp/pop3 basic configuration – step by step – 2N BRI Lite/Enterprise v1.8 User Manual
Page 84
84
1.
a.
b.
2.
a.
b.
c.
3.
a.
SMTP/POP3 Basic Configuration – Step by Step
This section helps you define the
basic parameters for SMS sending/receiving
2N BRI
®
subsection carefully before setting details.
shows sending/receving SMS via SMTP/POP3. Having created user accounts
Figure 1
in
, the users can access the accounts via the e-mail client and send SMS
2N BRI
®
messages to
via SMTP. The gateway receives the messages and resends
2N BRI
®
them to the GSM users according to the predefined routing rules.
A message coming to
from GSM is routed according to the incoming SMS
2N
BRI
®
rules and delivered to the user via POP3.
SMTP/POP3 Communication
Figure 1:
Take the following basic steps in
to enable SMS sending/receiving:
2N BRI
®
In the
menu:
Messaging / SMS grouping
Assign the selected GSM modules to the SMS groups (according to the GSM
provider and SIM cards with identical tariffs, for example).
Assign the SMS groups created in step 1.a above to the User groups if you
use messaging with different routing rules to different company
departments, for example.
Add users in the
menu:
Messaging / Users / Add
Assign the user to a
.
User group
Set
.
Access type: Email(SMTP/POP3)
Define the
and
to log in to the
Login name (without domain)
Password
SMS server via your e–mail client.
Set the Domain in the Messaging / User Group / General settings / Email
menu.
settings / Domain
Set the user domain. The domain is automatically assigned to the user
Note
You can send an SMS message of any length to up to 100 users at the
same time from the e-mail client. The maximum SMS count per e-mail is
only limited by the
/
/
User group
General settings SMTP
Maximum
settings.
SMS per email