Smpp basic configuration – step by step – 2N BRI Lite/Enterprise v1.8 User Manual
Page 86
86
1.
a.
b.
2.
a.
b.
c.
d.
3.
a.
b.
c.
4.
SMPP Basic Configuration – Step by Step
This section helps you define the basic parameters for SMS sending/receiving via SMPP
in
. Read the
subsection carefully before setting details.
2N BRI
®
shows sending/receiving SMS via SMPP. Having created user accounts in
Figure 1
2N
, the users can send/receive SMS via SMPP. The figure shows an example with
BRI
®
two SMSC accounts created in
(to the right). Another
(ESME)
2N BRI
®
2N BRI
®
gateway and a PC on which the SMPP (ESME) application is running are connected to
these accounts via SMPP. An SMS coming to
via SMPP is routed according to
2N BRI
®
the gateway outgoing routing rules and sent to GSM. An SMS coming from GSM is
routed according to the gateway incoming routing rules and sent to the destination via
SMPP.
SMPP Communication
Figure 1:
Take the following basic steps in
to enable SMS sending/receiving:
2N BRI
®
In the
menu:
Messaging / SMS grouping
Assign the selected GSM modules to the SMS groups (according to the GSM
provider and SIM cards with identical tariffs, for example).
Assign the SMS groups created in step 1.a above to the User groups if you
use messaging with different routing rules to different company
departments, for example.
Add users in the
menu:
Messaging / Users / Add
Assign the user to a
.
User group
Set
Access type: SMPP (SMSC).
Set
and
to access the GSM gateway SMS server via
System ID
Password
ESME.
Set
.
TCP type: server
Create the incoming SMS routing rules in the Messaging / User Group /
menu:
General settings / Incoming SMS routing / Add
Select the group to receive the SMS via the Message from SMS group
menu.
Select the
to define how to process incoming SMS. Example:
Action type
Set
to deliver SMS to selected users.
Action type: Deliver to user
Set
to to define the SMS receiving user.
Deliver to user