2N BRI Lite/Enterprise v1.8 - Manual (Page 95)

95
2N TELEKOMUNIKACE a.s., www.2n.cz
®
6.1 LAN Communication Setting
First set the IP address to communicate with the gateway via your 2N BRI gateway
LAN successfully. To do so, configure the Ethernet interface; refer to . Use any Subs.4.1
of the available programs (HyperTerminal, Telnet, Putty, etc.) for communication and
configuration with the following data:
IP address:address set by you
Port:23 (Telnet)