2N BRI Lite/Enterprise v1.8 - Manual (Page 96)

96
2N TELEKOMUNIKACE a.s., www.2n.cz
®
6.2 GSM Gateway Behaviour
The gateway behaves as an ANSI terminal with echo. Commands are entered in the
text format. Upon login, the gateway reports itself with
. If not, enter the comma OK at
nd and press <ENTER>. A correctly connected gateway should answer . In such OK
case, the gateway starts communicating with a dialogue shown in the figure below.
Enter the user name, press <ENTER> and, when being asked so, enter the access
. Password
.