2N BRI Lite/Enterprise v1.8 - Manual (Page 56)

56
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Gateway Configuration
System Parameters
General
Saving call data (CDR) – define the call types for which the GSM gateway shall
store information in the CDR.
Gateway ID – provides
gateway with a numerical code in the CDR in 2N BRI
®
case multiple devices generate CDRs in the network.
Number for remote control.
Summer / winter time
Automatically move to summer/winter time – enable automatic GSM gateway
system time change for winter/summer time format transition.
Date of move to winter time [dd.mm] – specify the day and month for the
change.
Date of move to summer time [dd.mm] – specify the day and month for the
change.
Mobility Extension (DTMF settings)
Start dialling (quick call forwarding) – set the DTMF code for quick call forwarding
start.
End dialling (quick call forwarding) – set the DTMF code for quick call forwarding
end.
Hold call – set the DTMF code for the current call holding.
Hang up call – set the DTMF code for the current call termination.
'Follow me' activation – activate the
function to make the GSM Follow me
gateway start routing calls to the defined GSM/UMTS user number. The default
value is *55.
'Follow me' deactivation – deactivate the
function. The default value Follow me
is #55.
'SMS at no answer' activation – activate the
function for a SMS at no answer
registered user. The default value is *33.
'SMS at no answer' deactivation – deactivate the
function for SMS at no answer
a registered user. The default value is #33.
Others
PIN – set the PIN code for the PIN–secured SIM cards.
Tip
Activate/deactivate the and functions by SMS at no answer Follow me
dialling the above mentioned DTMF access codes into the GSM gateway
from a registered mobile user number. You can change the function
values via the configuration interface too (see below).